Matrix Switch Component video Matrix Serise
XUNWEI Three-component (YUV) video matrix switchers, BNC interface.
Is designed for three-component (YUV) video signals are designed to
switch the display of high-performance intelligent matrix switch
equipment for the various three-component (YUV) video input signals
to switch to the various three-component (YUV) video output
channels any one channel, mainly used in radio and television
projects, multimedia conference room, large screen display works,
television teaching, combined with command and control centers.
This product is off the scene with a memory protection switch,
infrared remote control functions and control interface with RS232,
it will be convenient and personal computers, remote control
systems or a variety of remote control equipment
Characteristic
Automatic gain technology to achieve off-site matrix switchers with
protection;
equipment to automatically save the state at the time of the last
shutdown;
adjust the delay time;
the use of a new type of LED display and touch-panel buttons;
state show a reasonable intuitive, easier to operate equipment;
LCD screen display the status of input and output control;
Simple front panel operation, the back plate there is a line and
control system can use the RS-232C communication port;
installation fast and easy to operate.
Technical Data
Basic Bandwidth100Mhz(-3db) Fully loaded Light degree of interference-55dB@5Mhz Differential Phase0.05o(RL=150) Differential gain0.05%(RL=150) Maximum delay spread5ns(1) Switching speed180ns Video Signal input------- Signal typeThree component video InterfaceBNC Minimum Level0.5Vp-p Maximum Level1.0Vp-p Impedance75 Return Loss-30db@5MHz Signal output------- Signal typeThree component video InterfaceBNC Output Level0.7Vp-p Impedance75 Return Loss-30db@5MHz DC compensationMaximum 5mV Synchronization------- Input / output signal typesTTL Input level0V-5.0Vp-p:4.0V Output Level5Vp-p Input impedance 510 Output impedance75 Polar positive or negative (and enter exactly the same) Control Type Serial control interfaceRS-232, 9-pin female D-type interface Baud rate baud rate and protocol9600 Data bit8 Stop bit1, no parity bit Serial control port structure2=TX3=RX5=GND Wireless technologyInfrared Remote Control Standards Power source100VAC ~ 260VAC, 50/60 Hz,International adaptive power Power20W Chassis Size485mm(L)×260mm(W)×132mm(H)
